Services
Connect with a Skilled Professional in Your Area
Tile Cutting Service
€10 (incl. VAT)
Our tile cutting service includes:
Setup Fee: €15 (one-time charge for setting up and cleaning the machine)
Cost per Cut: €10 (for each individual cut)
€12 (incl. VAT)
Setup Fee: €15 (one-time charge for setting up and cleaning the machine)
45-degree Angle Cut: €12 (for cutting tiles at a precise 45-degree angle)
Tile Cutting Service
At Saniso, we offer a professional and precise tile cutting service to help you achieve the perfect fit for your project. Whether you’re tackling a DIY renovation or need custom tile cuts for a professional installation, we’re here to assist.
Our tile cutting service includes:
Setup Fee: €15 (one-time charge for setting up and cleaning the machine)
Cost per Cut: €10 (for each individual cut)
45-degree Angle Cut: €12 (for cutting tiles at a precise 45-degree angle)
We provide high-quality, accurate cuts for tiles of various materials and sizes. Whether you need straight cuts or angled cuts, our team ensures a clean and professional finish every time. The 45-degree angle cut is ideal for creating clean, sharp corners for your design, adding a sleek, modern look to your space.
Please note that we also offer a Measurement Verification Service to ensure your tiles and measurements are accurate before cutting, minimizing the risk of mistakes.
Own Tiles & Measurements – Risk Disclaimer
When supplying your own tiles and/or measurements, please be aware that there is an inherent risk involved. We will make every effort to cut your tiles accurately based on the provided measurements, but we cannot be held responsible for any errors resulting from:
Incorrect measurements: If the measurements provided are inaccurate or do not align with your intended design.
Tile imperfections: Tiles that are damaged, warped, or have irregularities that affect the cutting process.
We strongly recommend that you double-check all measurements and ensure the quality of your tiles before submitting them for cutting.
While we aim for the best possible outcome, we cannot guarantee the final result if there are any issues with the tiles or measurements you provide.
To minimize risks, you may consider our Measurement Verification Service (additional fee), where our team will review and confirm your measurements before we proceed with cutting.
Measurement Verification Service
For peace of mind, you can opt for our Measurement Verification Service, where we will double-check your measurements to ensure accuracy before we begin cutting. This service is available for an additional fee and is highly recommended for customers who want to avoid any potential issues with their tiles or design.
Tile Cutting
Service
Custom size tiles
Contractor
Site Visit
Well-prepared start
DIY
Consultancy
On Location
DIY
Consultancy
Telephone Call
Handover
inspection
Construction Expert
Bathroom
Cleaning
Handover Cleaning Service
Thermal
& inspection
Camera Service
Contractor site visit
€250 (incl. VAT)
A professional contractor will visit your location to assess the space and provide expert advice. This €250 will be fully deducted when purchasing a bathroom of €1,000 or more. Ensure a smooth renovation with insights from an experienced professional before making a final decision.
This visit guarantees a well-prepared renovation with professional advice.
After purchase, Saniso will contact to schedule an appointment.
Visit from the Contractor
What is checked?
During the visit, a professional contractor will review the following:
Space analysis
Measuring the dimensions and checking existing pipes and electricity.
Feasibility Check
Identify potential challenges and preparations needed.
Expert advice
Recommendations for layout, materials and technical solutions.
Preparing for installation
Making sure everything is ready for a smooth execution.
This visit guarantees a well-prepared renovation with professional advice.
DIY Consultancy
€240 (incl. VAT)
Want to renovate your bathroom yourself, but still want certainty with professional advice? With this package you receive (1 hour) expert support on location without outsourcing the entire installation.
€59 (incl. VAT)
Professional advice by phone or video chat for a confident approach to the renovation. With this package you receive 1 time advice by phone or video chat (up to 1 hour) expert support.
Do it yourself!
Professional help, exactly when you need it!
Want to renovate your bathroom yourself, but still want certainty with professional advice?
1x (up to 1 hour) access to the professional helpline.
Ask your questions directly to an experienced professional via telephone or video chat.
Saniso also offers a package where you receive (1 hour) expert support on location without outsourcing the entire installation.
Possibility to have specific work carried out.
Do you need help with a difficult part? A professional can take over certain tasks at a previously agreed rate.
Example situations in which this package helps:
Laying tiles:
You have started tiling, but you are unsure whether you are working level. You call the professional for tips to prevent crooked work.
Preventing leakage
You have connected the pipes, and want to make sure everything is properly sealed. You call the professional for tips to prevent leakage.
Complete sanitary installation
You want to install a floating toilet, but you get stuck during the installation. You call the professional for tips to continue the installation. If it doesn’t work for you, we have the option a professional can take over for a fixed rate.
With these packages you do it yourself!, but you are never alone.
Professional help, exactly when you need it!
Handover inspection
€349 (incl. VAT)
A detailed inspection of the bathroom is carried out by Saniso, with a building expert or a specialist in sanitary installations.
If everything meets the requirements and standards, the bathroom can be formally handed over and is ready for use. In case of any defects, the contractor may be asked to address them before the handover is finalized.
Handover expert
What is involved in the building handover of a bathroom?
Handover inspection of the bathroom
A detailed inspection of the bathroom is carried out by Saniso, with a building expert or a specialist in sanitary installations.
The inspection checks if the bathroom meets the agreed specifications and if the installations have been properly executed.
Checking the finishes
The tiling must be neat and precise, with no visible errors or damage.
The finishing of the walls, floors, and ceiling must meet the agreed specifications.
The door and windows must close properly and be well-finished.
Any baseboards and finishing strips should be neatly and securely installed.
Checking sanitary ware and installations
All sanitary fixtures (toilet, shower, sink, bathtub, etc.) must be correctly installed and functioning properly.
Faucets must be leak-free and operate smoothly.
Drainage and water supply systems must be properly connected without any leaks.
Hot and cold water must be correctly mixed, and the temperature of the shower or faucet must be adjustable.
Check the operation of the ventilation and extraction systems in the bathroom to prevent mold.
Waterproofing and leaks
The bathroom, especially the shower and bathtub, must be waterproof, especially around drains and connections.
The sealing of the floor and walls (e.g., with sealant) must be done carefully to prevent leaks.
Check for water leaks around the shower, bathtub, and other sanitary fixtures.
Heating and electricity
Check if the underfloor heating (if present) works well and if the temperature settings are correct.
The bathroom lighting must function properly and meet the standards for bathroom lighting (e.g., IP protection against moisture).
Any electrical outlets should be safe and comply with the standards for wet environments.
Safety and compliance
The correct materials must be used, suitable for wet areas, such as waterproof tiles, special bathroom paint, and rust-resistant fasteners.
There must be proper ventilation (mechanical or natural) to prevent condensation and mold growth.
All electrical installations must meet the regulations for bathrooms (e.g., the correct RCDs and protection class for lighting).
Use slip-resistant materials for the bathroom floor to prevent falls.
Documentation and warranties
The contractor should provide documentation for the materials used, such as tile or floor finishing specifications, and any inspection reports from the installations (e.g., from the plumber or electrician).
Warranty conditions for sanitary products (faucets, showerheads, etc.) and installations should be handed over.
What must be complied with during the building handover of a bathroom?
Waterproof finishes and sealing
The bathroom must be waterproof, especially around the shower, bathtub, and toilet. This applies to both the floors and the walls.
The seams must be properly sealed, and no water should get behind tiles or other areas, which could lead to mold or water damage.
Proper installation of sanitary ware
All sanitary fixtures must be securely installed and function correctly. This includes the toilet, sink, shower, bathtub, and faucets.
No leaks should occur at the pipe connections.
Safety
All electrical installations must be safe and suitable for use in a wet area.
Lighting should comply with the protection class requirements for wet rooms.
Electrical outlets must meet the required standards for bathrooms (e.g., moisture protection).
Ventilation
The ventilation system in the bathroom must work well to regulate humidity and reduce condensation.
A functioning ventilation system or extractor fan should be present to prevent mold growth.
Aesthetic finishes
The finishes must be neat and as agreed, with no defects such as loose tiles, crooked lines, or visible damage.
The floor must be slip-resistant and suitable for wet areas.
Use of appropriate materials
The materials must be suitable for bathroom use, such as waterproof paint, rust-resistant fasteners, and moisture-resistant tiles.
Handover
If everything meets these requirements and standards, the bathroom can be formally handed over and is ready for use. In case of any defects, the contractor may be asked to address them before the handover is finalized.
Cleaning Service
€249 (incl. VAT)
Professional Bathroom Handover Cleaning
Let us add the finishing touch to your new bathroom. Our thorough handover cleaning ensures a spotless and ready-to-use bathroom from day one. Enjoy the convenience!
After purchase, Saniso will contact to schedule an appointment.
Cleaning Service
From Construction Dust to Pure Relaxation!
After installation, dust, adhesive residues, cement haze, and other construction debris are often left behind. We ensure your bathroom is perfectly clean and ready for use.
What Does Our Service Include?
Thorough cleaning of all surfaces
We remove construction dust, stains, and residue from grout, sealant, and adhesive on tiles, fixtures, and glass.
Limescale and cement haze removal
Tiles may have a haze from cement or limescale after installation. We use specialized cleaning agents to make everything spotless and streak-free.
Polishing of sanitary ware and fixtures
All taps, showerheads, bathtubs, and sinks are carefully cleaned and polished for a shiny, streak-free finish.
Deep floor cleaning
We remove dust and dirt, leaving your floor immaculately clean.
Eco-friendly and safe cleaning products
We use professional yet environmentally friendly cleaning solutions, ensuring your bathroom is clean and safe for use.
With our handover cleaning service, you can immediately enjoy your new bathroom without any hassle!
Thermal & inspection
€499 (incl. VAT)
Prevent Damage, Save Costs!
Hidden issues can lead to major damage. With our inspection camera and thermal camera service, we detect leaks, blockages, and heat loss quickly and accurately. No unnecessary demolition, just effective solutions. Avoid expensive repairs and keep your bathroom in top condition!
Schedule an inspection and prevent costly repairs!
After purchase, Saniso will contact to schedule an appointment.
Thermal & inspection
Hidden issues can lead to major damage!
Problems in the bathroom or plumbing system aren’t always visible to the naked eye. With our inspection camera and thermal camera service, we quickly and accurately detect blockages, leaks, and hidden issues without unnecessary demolition work.
Inspection Camera Service
Our advanced inspection cameras allow us to examine the inside of pipes, drains, and sewer lines in detail. This enables us to:
Detect blockages and cracks without breaking walls or floors
Pinpoint the exact location of the problem, allowing for targeted repairs
Identify maintenance issues early, preventing costly damage
Thermal Camera Service
Our thermal cameras detect temperature differences in walls, floors, and ceilings, helping to:
Find hidden leaks in pipes, underfloor heating, and bathroom fixtures
Identify heat loss and poorly insulated areas
Prevent moisture and mold problems by detecting issues early
With our professional camera inspection, you save time, money, and unnecessary damage.
